Water Heater Rental Information

Bradford White – Electric Water heater
RE240S6‐1NCPP
10 Year Rent to own.
10 Year Part and Labour Warranty
40Gallon – 100Gallon (Rental agreements starting as low as $13.36 a month.

Residential Upright Electric Water Heater

The Upright Electric Models Feature:

  • Fully Automatic Thermostat Controls—Fast acting surface-mount thermostat with high limit energy cut-off (manual) reset) for safety.
  • Direct Heat Transfer With Immersed Elements—Transfer heat directly and efficiently to the water. Screw-in style.
  • Factory-Installed Hydrojet Total Performance System—Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank.
  • Vitraglas Lining—An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas) is fused to the steel surface by firing at a temperature of over 1600°F (871°C).
  • Insulation System—Non-CFC foam covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity.
  • Water Connections—3/4″ (19mm) NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections.
  • Factory-Installed Heat TrapsDesign incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation.
  • Protective Magnesium Anode Rod—Provides added protection against corrosion for long-term, trouble-free service.
  • Simultaneous and Non-Simultaneous Operation Available—Simultaneous operation indicates when both elements (if equipped) are being heated at the same time. Non-Simultaneous operation indicates when one element is being heated at a time.
  • Voltages Available—120V, 208V, 240V, 277V, 480V.
  • Single Phase or Three Phase Operation Available—120V and 277V may only be wired for single phase operation.
  • T&P Relief Valve—Installed
  • Design evaluated by ETL in accordance with Part 280.707(d) of HUD Mobile Home Construction and Safety Standards for Energy Efficiency.

Contact Triton Plumbing + Service today to solve your plumbing woes and keep your pipes running smoothly

Bradford White – Power Direct Vent Water heater
RG2PDV40S6N – 10 Year Rent to own.
10 Year Part and Labour Warranty

40Gallon – 60Gallon (Rentals starting as low as $33.74 a month)

Residential Power Direct Vent Gas Water Heater

The Power Direct Vent Models Feature:

  • ENERGY STAR Qualified—Some models meet or exceed requirements for ENERGY STAR per the latest ENERGY STAR criteria revision, as well as most utility rebate programs.
  • Bradford White ICON System—Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot. This results in savings of pilot gas during standby periods (120 VAC).
    • Enhanced Performance—Proprietary algorithms provide enhanced First Hour Rating and tighter temperature differential.
    • Advanced Temperature Control System—Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels.
    • Intelligent Diagnostics—An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting.
    • Pilot On Indication—Flashing green LED provides positive indication that pilot is on.
    • Separate Immersed Thermowell—High-strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water. No need to drain the tank when removing gas valve.
  • Closed Combustion Venting System—Power Direct Vent models are ideal for installations which lack sufficient are for combustion, such as new construction homes or additions which are tightly insulated. These models use a twin pipe system where combustion air is drawn from outside the building in one pipe, and combustion products are expelled to the outside in another pipe.
  • Cast Aluminum Air Intake Boot—A cast molded air intake boot design provides exceptional durability during installation and operation.
  • Horizontal and Vertical Venting—PVC, ABS, or CPVC. The equivalent feet of intake venting cannot be greater than the equivalent feet of exhaust venting.
  • Optional Concentric Vent Kit Termination—Termination fitting provides for only one exit opening through a wall or roof. (Subtract 10ft. (3m) for intake pipe and 10ft. (3m) for exhaust pipe when calculating total vent length.)
  • Flammable Vapor Sensor—Electronic sensor prevents burner operation if flammable vapors are detected. The sensor will also prevent operation if there is ongoing flammable vapors burning inside the combustion chamber (excluding RG2PDV75H6N).
  • Factory-Installed Hydrojet Total Performance System—Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank.
  • Vitraglas Lining—An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas) is fused to the steel surface by firing at a temperature of over 1600°F (871°C).
  • Insulation System—2° (51mm) Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity.
  • Water Connections—3/4″ (19mm) NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections.
  • Side Connections—3/4″ (19mm) NPT tappings allow easy connections for space heating applications (Potable water only) (RG2PDV50H6N & RG2PDV75H6N only).
  • Factory Installed Heat Traps—Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation.
  • Protective Magnesium Anode Rod—Provides added protection against corrosion for long-term, trouble-free service.
  • T&P Relief Valve—Installed
  • Low Restrictive Brass Drain Valve—Durable tamper proof design.
  • NOx Emissions—Less than 40 ng/J.

Bradford White – Energy Star Power vent water heater
RG2PV40S6N- 10 Year Rent – 10 Year Part and Labour Warranty
40Gallon – 60Gallon (Starting at $29.48 a month)

Residential Power Vent Gas Water Heater

The TTW Models Feature

  • ENERGY STAR Qualified—Some models meet or exceed requirements for ENERGY STAR per the latest ENERGY STAR criteria revision, as well as most utility rebate programs.
  • Bradford White ICON System—Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot. This results in savings of pilot gas during standby periods (120 VAC).
    • Enhanced Performance—Proprietary algorithms provide enhanced First Hour Rating and tighter temperature differential.
    • Advanced Temperature Control System—Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels.
    • Intelligent Diagnostics—An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting.
    • Pilot On Indication—Flashing green LED provides positive indication that pilot is on.
    • Separate Immersed Thermowell—High-strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water. No need to drain the tank when removing gas valve.
  • Power Vented Water Heater—Designed for installations where atmospheric units cannot be used. Exhaust gases are vented under positive pressure directly out of the building through the roof or the wall.
  • Powerful Blower Motor—Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations
    • Ten Foot Power Cord—Included (120VAC).
  • Horizontal and Vertical Venting—PVC, ABS, or CPVC. (Maximum equivalent vent length on reverse side).
  • Advanced ScreenLok Technology Flame Arrestor Design—Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater (excluding RG1PV55H6N & RG2PV75H6N).
  • Flammable Vapor Sensor—Electronic sensor prevents burner operation if flammable vapors are detected. The sensor will also prevent operation if there is ongoing flammable vapors burning inside the combustion chamber (excluding RG1PV55H6N & RG2PDV75H6N).
  • Maintenance-Free—No regular cleaning of air inlet openings or flame arrestor is required under normal conditions (excluding RG1PV55H6N & RG2PV75H6N).
  • Sight Window—Offers a view into the combustion chamber to observe the operation of the pilot and burner.
  • Factory-Installed Hydrojet Total Performance System—Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank.
  • Vitraglas Lining—An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas) is fused to the steel surface by firing at a temperature of over 1600°F (871°C).
  • Insulation System—2° (51mm) Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity.
  • Water Connections—3/4″ (19mm) NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections.
  • 3/4″ (19mm) NPT Side Connections—(RG2PDV50H6N, RG1PV55H6N, & RG2PDV75H6N only).
  • Factory Installed Heat Traps—Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation.
  • Protective Magnesium Anode Rod—(RG1PV55H6N has 2).
  • T&P Relief Valve—Installed
  • Thermostatic Mixing Valve (ASSE Approved)—Included (RG1PV55H6N only)
  • Low Restrictive Brass Drain Valve—Durable tamper proof design.
  • NOx Emissions—Less than 40 ng/J.

Bradford White Infinity K Series RTG-K 199-N1

10 Year Rent – 10 Year Part and Labour Warranty

199K BTU (Starting at $46.00 a month)

Infiniti K Series Tankless (Condensing) Gas Water Heater Indoor Models

The Infiniti K Series Tankless Condensing Water Heater Models Feature:

  • ENERGY STAR Qualified—Some models meet or exceed requirements for ENERGY STAR per the latest ENERGY STAR criteria revision, as well as most utility rebate programs.
  • SRT Scale Reduction Technology—Significantly reduces the incidence of scale build-up known to result in poor performance, additional maintenance, and premature component or product failure.
  • STEADISET Technology—Virtually eliminates cold water sandwich without the need for an internal buffer tank and recirculation pump.
  • Self-Calibrating Fan and Gas Valve—Simple combustion management system uses self-calibrating sensors to automatically configure air fuel ratio for flue length, gas type, and altitude – without a combustion analyzer.
  • Modulation—Segmented burner with 22:1 turn down ratio.
  • Top Water Connections—Top water connections for easy retrofit.
  • Built-In Digital Control—Temperature can be adjusted on the front control panel (100°F – 140°F) (38°C – 60°C).
  • Active Bypass—Achieves superior temperature stability (+/- 2°F) (+/- 1°C).
  • External Recirculation Pump Wiring—Installed. Built-in controls provides precise operation of external recirculation pump with, or without, additional external temperature sensor (Recirculation pump sold separately).
  • Venting Length Up To 280 ft.—Direct vent, power vent, and concentric venting terminations approved. PP, PVC, and CPVC approved venting material (refer to I&O manual for details). 2″ (51 mm) vent up to 60 ft. (18m) and 3″ (76mm) vent up to 280 ft. (85m).
  • Gas Connection Flexibility—1/2″ (13 mm), 3/4″ (19 mm), or 1″ (25 mm) connections permitted (refer to I&O manual for details).
  • Inlet Water Filter—External access for easy maintenance.
  • Space Saving Installation—Compact size for tight installations.
  • Built-In Freeze Protection—Protects unit from freezing. Activates automatically when the water heater is plugged in.
  • Easy LP Gas Field Convertibility—Purchase of additional kit NOT required to convert from NG to LP.
  • Heat Exchanger—Primary Copper with Secondary Stainless Steel (316L) heat exchanger helps maximize life and minimize scale build-up.
  • Pressure Relief Valve—Included (Integral port).
  • Built-In Flush Valves—For servicing/de-scaling.
  • Flushing Condensate Trap.
  • Intelligent Cascading Kit (Optional)—Up to 24 units can be connected together with ease.
  • Complies with the latest Ultra-Low NOx requirement (14 ng/J NOx limit).

Bradford White – atmospheric vent gas water heater RG240S6N

10 Year Rent – 10 Year Part and Labour Warranty

40 – 60 Gallons (Rental Agreements Starting as low as $20.63 a month)

Residential Atmospheric Vent Gas Water Heater

The Atmospheric Vent FVIR Defender Safety System Models Feature:

  • Bradford White ICON System—Intelligent gas control with proven millivolt powered technology and built-in piezo igniter. A standard, off-the-shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor. No need for external electricity
    • Enhanced Performance—Proprietary algorithms provide enhanced First Hour Rating and tighter temperature differential.
    • Advanced Temperature Control System—Microprocessor controls burner operation for consistent and accurate water temperature levels up to 160°F (71°C).
    • Intelligent Diagnostics—Exclusive multicolor LED light indicates operation status/service required.
  • Advanced ScreenLok Technology Flame Arrestor Design—Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater.
  • Resettable Thermal Switch—Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow.
  • Maintenance-Free—No regular cleaning of air inlet openings or flame arrestor is required under normal conditions.
  • Sight Window—Offers a view into the combustion chamber to observe the operation of the pilot and burner.
  • Factory-Installed Hydrojet Total Performance System—Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank.
  • Vitraglas Lining—An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas) is fused to the steel surface by firing at a temperature of over 1600°F (871°C).
  • Insulation System—2° (51mm) Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity.
  • Pedestal Base.
  • Water Connections—3/4″ (19mm) NPT factory-installed true dielectric fittings.
  • Factory Installed Heat Traps.
  • Protective Magnesium Anode Rod.
  • 3×4 “Snap Lock” Draft Diverter—Allows either 3″ (76 mm) or 4″ (102 mm) vent connections with inputs of 40,000 BTU/hr or less. Over 40,000 BTU/hr has the 4″ (102 mm) “Snap Lock” Draft Diverter.
  • T&P Relief Valve—Installed
  • Low Restrictive Brass Drain Valve—Durable tamper proof design.
  • NOx Emissions—Less than 40 ng/J.

Bradford White – Residential Heat Pump Water Heater

10 Year Rent To Own – 10 Year Warranty

50Gallon & 80Gallon (Rental Agreements Starting At $55.70)

Residential AeroTherm Series Heat Pump Water Heater

AeroTherm Heat Pump Model Features:

  • ENERGY STAR Qualified—Meet or exceed requirements for ENERGY STAR per the latest ENERGY STAR criteria revision, as well as most utility rebate programs.
  • The AeroTherm Series Control Panel—Provides detailed diagnostic information including water heater fault codes, tank, codes, need-to-assess codes, and heat pump codes. Additional functions allow you to monitor the status of temperature sensing thermistors and heating components.
    • User-Friendly, Easy To Read Display.
    • LED’s Clearly Indicate The Current Operating Mode.
    • Display Communicates Current Status, Mode and Set Point, and Displays Error Messages When Applicable.
  • Operating Modes Offer Flexibility
    • Heat Pump (Only) Mode—Maximizes consumer savings. The most energy-efficient mode as it only utilizes the heat pump.
    • Hybrid Mode—Saves while experiencing fast recovery. Hybrid mode is the factory setting combining heat pump efficiency and savings with recovery rates of standard electric when needed.
    • Electric (Only) Mode—Operated like standard electric water heater, and eliminates the air flow and sound from the heat pump system when preferred (fastest recovery time, but least energy efficient).
    • Vacation Mode—Adjusts the temperature set point down to 50°F (10°C) for extended period of time.
  • Vitraglas Lining—An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas) is fused to the steel surface by firing at a temperature of over 1600°F (871°C).
  • Quiet Operation—Operating sound level of approximately 55DBA.
  • Can Be Laid Down For Easier Transportation—Easy-to-open, protective packaging.
  • Operating Air Temperature Range Of 35°F – 120°F (2°C – 49°C) For The Heat Pump—(Unit operates in Standard/Electric Mode outside of this range).
  • Backup Electric Heating Elements
  • Direct Heat Transfer With Immersed Elements—Transfers heat directly and efficiently to the water. Screw-in style.
  • Insulation System—2° (51mm) Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity.
  • Water Connections—3/4″ (19mm) NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections.
  • Factory Installed Heat Traps—Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation.
  • Protective Magnesium Anode Rod—Provides added protection against corrosion for long-term, trouble-free service.
  • T&P Relief Valve—Installed
  • Low Restrictive Brass Drain Valve—Durable tamper proof design.
  • Northern Climate Tier 3 Capable
  • Optional Ducting Kit—Maximum duct length of 100 feet (30m) combined between inlet and exhaust.

Call Triton Plumbing & Service

Is it time to rent a hot water heater? If so, give us a call.

We’ll send an experienced technician over to your house to inspect your current system and suggest the best option based on your unique needs.

From energy-efficient models to cost-effective ones, Triton can provide you with the hot water heater you need.